Endpoint packet management definitions for the Atmel AVR32 UC3 architecture. More...

Functions
static void	Endpoint_AbortPendingIN (void)

static void	Endpoint_ClearIN (void) ATTR_ALWAYS_INLINE

static void	Endpoint_ClearOUT (void) ATTR_ALWAYS_INLINE

static void	Endpoint_ClearSETUP (void) ATTR_ALWAYS_INLINE

static void	Endpoint_ClearStall (void) ATTR_ALWAYS_INLINE

static uint8_t	Endpoint_GetBusyBanks (void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT

static bool	Endpoint_IsINReady (void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE

static bool	Endpoint_IsOUTReceived (void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE

static bool	Endpoint_IsReadWriteAllowed (void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE

static bool	Endpoint_IsSETUPReceived (void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE

static bool	Endpoint_IsStalled (void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE

static void	Endpoint_StallTransaction (void) ATTR_ALWAYS_INLINE

Detailed Description

Functions, macros, variables, enums and types related to packet management of endpoints.

Function Documentation

static void Endpoint_AbortPendingIN ( void )

inlinestatic

Aborts all pending IN transactions on the currently selected endpoint, once the bank has been queued for transmission to the host via Endpoint_ClearIN(). This function will terminate all queued transactions, resetting the endpoint banks ready for a new packet.

static void Endpoint_ClearIN ( void )

inlinestatic

Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the next packet and switching to the alternative endpoint bank if double banked.

static void Endpoint_ClearOUT ( void )

inlinestatic

Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint for the next packet and switching to the alternative endpoint bank if double banked.

static void Endpoint_ClearSETUP ( void )

inlinestatic

Clears a received SETUP packet on the currently selected CONTROL type endpoint, freeing up the endpoint for the next packet.

Note: This is not applicable for non CONTROL type endpoints.

static void Endpoint_ClearStall ( void )

inlinestatic

Clears the STALL condition on the currently selected endpoint.

static uint8_t Endpoint_GetBusyBanks ( void )

inlinestatic

Retrieves the number of busy banks in the currently selected endpoint, which have been queued for transmission via the Endpoint_ClearIN() command, or are awaiting acknowledgement via the Endpoint_ClearOUT() command.

Returns: Total number of busy banks in the selected endpoint.

static bool Endpoint_IsINReady ( void )

inlinestatic

Determines if the selected IN endpoint is ready for a new packet to be sent to the host.

Returns: Boolean true if the current endpoint is ready for an IN packet, false otherwise.

static bool Endpoint_IsOUTReceived ( void )

inlinestatic

Determines if the selected OUT endpoint has received new packet from the host.

Returns: Boolean true if current endpoint is has received an OUT packet, false otherwise.

static bool Endpoint_IsReadWriteAllowed ( void )

inlinestatic

Determines if the currently selected endpoint may be read from (if data is waiting in the endpoint bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an IN direction). This function will return false if an error has occurred in the endpoint, if the endpoint is an OUT direction and no packet (or an empty packet) has been received, or if the endpoint is an IN direction and the endpoint bank is full.

Returns: Boolean true if the currently selected endpoint may be read from or written to, depending on its direction.

static bool Endpoint_IsSETUPReceived ( void )

inlinestatic

Determines if the current CONTROL type endpoint has received a SETUP packet.

Returns: Boolean true if the selected endpoint has received a SETUP packet, false otherwise.

static bool Endpoint_IsStalled ( void )

inlinestatic

Determines if the currently selected endpoint is stalled, false otherwise.

Returns: Boolean true if the currently selected endpoint is stalled, false otherwise.

static void Endpoint_StallTransaction ( void )

inlinestatic

Stalls the current endpoint, indicating to the host that a logical problem occurred with the indicated endpoint and that the current transfer sequence should be aborted. This provides a way for devices to indicate invalid commands to the host so that the current transfer can be aborted and the host can begin its own recovery sequence.

The currently selected endpoint remains stalled until either the Endpoint_ClearStall() macro is called, or the host issues a CLEAR FEATURE request to the device for the currently selected endpoint.